Coal sampling and preparation, Standard laboratory tests of coal and Dispatch
Times Marine Services
Coal sampling and preparation
Coal sampling is performed whenever there is a need to analyse the coal. Coal is highly heterogeneous in nature consisting of particles of various shapes and sizes each having different physical characteristics, chemical properties and residual ash content. Sampling is further complicated by the sampling equipment available, the quantity to be represented by the sample mass and the degree of precision required.
In addition, the coal to be sampled may be a blend of different coal types and how the coal is blended has a profound effect on the way a representative sample is obtained. Coal sampling protocols must satisfy the general principles of sampling so as to provide material, which, when analysed, will provide results that are representative of the lot sampled. National and international standards have been developed to provide guidelines for coal sampling procedures under different conditions, sample preparation and bias test procedures for the purpose of obtaining unbiased samples.
The selection of a sampling method depends on factors, such as the sampling purpose, accuracy desired, accessibility of the site and the technical, economic and time constraints. Mechanical sampling from moving streams is the preferred method for sampling fuels, while manual sampling should always be avoided whenever possible. The best location for sampling from a moving stream is at the discharge point of a conveyor belt or chute where the complete stream can be intersected at regular intervals. Coal samples can also be taken from a moving conveyor belt.
Sampling from stationary coal, such as a coal storage pile or railcars, is sometimes necessary – but is problematic. Automated mechanical sampling systems have now gained widespread application. To ensure a sample is representative, correct sampling and preparation procedures should be followed and certain rules adhered to. Modifications to the standard procedures may have significant effects on the precision of the final results, which can lead to disputes between the seller and the customer.
Standard laboratory tests of coal
The type of analysis normally requested by the coal-mining and coal-consuming industries may be a proximate analysis and/or an ultimate analysis, together with one or more of the miscellaneous analyses or tests.
Due to the heterogeneous nature of coal, several analytical techniques are needed for its characterisation in order to accurately predict its behaviour during applications such as coal combustion. The analyses need to be sufficiently accurate so as to preclude negative scientific or economic consequences. Coal has the tendency to gain or lose moisture and to undergo oxidation when exposed to the atmosphere. Also, many of the test methods applied to coal analysis are empirical in nature; it is therefore necessary that all coal analyses follow some kind of procedural guidelines in order to obtain reproducible results. In other words, there is a requirement that reliable standard test methods be applied to coal analysis.
Furthermore, the significant volume of coal traded among coal-producing and coal-consuming countries means that cross-referencing of standards for coal sampling and coal analysis accepted by both seller and buyer is a necessity. As a result, international and various national standards for coal sampling and evaluation have been well established. Strict adherence to the standard procedures is necessary to obtain repeatable and reproducible results.
Conventional coal test methods are well established and are widely used in laboratories worldwide. However, these methods often involve the use of wet analysis or the use of typical laboratory bench-scale apparatus and can be time consuming. There are many relatively new approaches, usually based on modern sophisticated instrumentation, that have been shown to have wide applicability to coal analysis. Several such instruments are fast and can simultaneously determine carbon, hydrogen, and nitrogen and/or other elements in various samples
Drawing of samples from laden truck and wagons while loading, sample preparation and analysis to arrive at quantity dispatched from plot.